Total
Total
Go to content

Main menu:

NEW stencil - WWII German National stencil 1:35 scale

Orlee
Published by in New product ·
Tags: wwiigermannational1:35scale

Material: Stencil WWII German National 2 set in scale 1:35
Number stencil: 1 pcs

Instructions:
Masking adhesive grey translucent,  matte surface, 0.080 mm thick

The product consists of 1 stencil, which includes 40 mini stencils, divided into 4 categories and sizes.

The measures are: 6.6 mm 7 mm 8 mm and 9 mm made for military vehicles in 1:35 scale
The use of these stencils is very simple, it offers pure realism, the products can not be reused if used correctly


Use: airbrush or brush

Reusable: YES

¥ 1.250,00
€ 10,00
£ 8,00
$ 11,00

IMPORTANT!!!
The currency value of your currency is only indicative, the real price you pay for the product will be determined upon your purchase by your banker



New Stencil M113A2 conversions (4 versions) in scale 1:35

Orlee
Published by in New product ·
Tags: m113a2militarymodelling
      

Material: Stencil U.S. M113/A2 military
Number stencil: 2 pcs

Instructions:
Masking adhesive green translucent,  matte surface, 0.080 mm thick, material by APA s.p.a
Masking adhesive grey translucent,  matte surface, 0.080 mm thick

The product consists of 2 stencils: the first stencil includes a conversion from decal to stencil (4 variants and 17 mini stencils), the second includes masking wheels (masking wheels).

The use of these stencils is very simple, it offers pure realism, the products can not be reused if used correctly
 
History
the M113 is a fully tracked troop carrier (VTT) designed in the fifties, with the possibility of hosting a fully equipped infantry squad and providing the troops with close fire support. In 1979 the engine cooling was improved by changing the position of the fan and the radiator. More resistant torsion bars have increased ground clearance and dampers have reduced the effects of ground strikes.

Armored fuel tanks were added externally on both sides of the rear ramp, freeing 0.45 cubic meters (16 square feet) of interior space. The weight of the M113A2 has been increased to 11,740 kilograms (25,880 lb). Since the added weight has hit its free edge when afloat, it is no longer necessary to be amphibious. Four-pipe smoke grenade launchers were also added. The suffix A2 is used on all variants to indicate the update to the A2 standard


Use: airbrush or brush

Reusable: YES

¥ 1.600,00
€ 12,00
£ 11,00
$ 15,00

IMPORTANT!!!
The currency value of your currency is only indicative, the real price you pay for the product will be determined upon your purchase by your banker



NEW product!!! Stencil Charcter for SCI-FI / Fantasy in scale 1:144

Orlee
Published by in New product ·
Tags: scifimodellingscale1:144fantasy
  

Material: Stencil Character SCI-FI / Fantasy
Number stencil: 2 pcs

Instructions:
Masking adhesive green translucent,  matte surface, 0.080 mm thick, material by APA s.p.a

Info:
This product consists of 2 stencils (Masking Apa), usable for scale modeling, especially for the SCI-FI / Fantasy category in the 1: 144 scale but can also be used for military dioramas.
Each stencil consists of letters and numbers (40 mini stencils)

The use of these stencils is very simple, it offers pure realism, the products can not be reused if used correctly





Use: airbrush or brush

Reusable: YES

¥ 1.600,00
€ 12,00
£ 11,00
$ 15,00

IMPORTANT!!!
The currency value of your currency is only indicative, the real price you pay for the product will be determined upon your purchase by your banker



New product!! stencil for Merkava IV in scale 1:72

Orlee
Published by in New product ·
Tags: merkavaIV1:72modellingscale
      

Material: Stencil Character markings merkava mk. IV in scale 1:72

Number stencil: 1 pcs

Instructions:
Masking adhesive grey translucent,  matte surface, 0.080 mm thick

Info:
This stencil is produced by offering 27 stencils for merkava Mk. IV,  usable to replace the decals in the 1:35 accademy, Hobby Boss, Accademy kit or other versions of kits for sale

History
The Merkava Mark IV is the latest version of the range of Merkava tanks built by Mantak (Merkava Tank Office). The Merkava Mark IV entered service with the Israeli Defense Forces in 2004 and is considered the most protected tank in the world.

the Merkava Mk. IV has the most distinctive feature of the new tower is the elimination of the servant's hatch. Its presence makes, according to Israeli military engineers, the tower more vulnerable to attack from above.
The servant can easily leave the wagon, in an emergency, from the rear hatch (as well as the entire crew). The Mk tank. IV was designed to provide 360º protection, including attacks from above.
The 120 mm cannon is a new concept, designed in Israel, can withstand higher internal pressures, allowing to shoot projectiles with kinetic energy KE (Kinetic Energy) at a greater speed, while the semi-automatic loader has been equipped with enough space to accommodate up to at 10 strokes.

The 7.62 mm coaxial machine gun was replaced with a 12.7 mm one.
The movement organs were also revised: a new 1500 hp engine is coupled to a new transmission and new "Caterpillar" suspension systems (the so-called "Mazkom" system, the track-springs-wheel system). The maximum speed of this version is around 60 km / h.
360º visibility is ensured by a video system consisting of four cameras installed in reinforced parts of the hull. The wagon also mounts a digital battle data collection and display system, similar to the US IVIS, designed by the Elbit System. The adoption of this new version of the Merkava led to the total radiation of the old Centurion of British production and the Magach from the departments of the reserve.



Use: airbrush or brush

Reusable: YES

¥ 1.000,00
€ 8,00
£ 7,00
$ 9,00

IMPORTANT!!!
The currency value of your currency is only indicative, the real price you pay for the product will be determined upon your purchase by your banker



New product!!! Stencil Character Markings Mk. IV

Orlee
Published by in New product ·
Tags: merkavamerkavamk.4mk4
      

Material: Stencil Character markings merkava mk. IV

Number stencil: 1 pcs

Instructions:
Masking adhesive grey translucent,  matte surface, 0.080 mm thick

Info:
This stencil is produced by offering 29 stencils for merkava Mk. IV,  usable to replace the decals in the 1:35 accademy, Hobby Boss kit or other versions of kits for sale

History
The Merkava Mark IV is the latest version of the range of Merkava tanks built by Mantak (Merkava Tank Office). The Merkava Mark IV entered service with the Israeli Defense Forces in 2004 and is considered the most protected tank in the world.

the Merkava Mk. IV has the most distinctive feature of the new tower is the elimination of the servant's hatch. Its presence makes, according to Israeli military engineers, the tower more vulnerable to attack from above.
The servant can easily leave the wagon, in an emergency, from the rear hatch (as well as the entire crew). The Mk tank. IV was designed to provide 360º protection, including attacks from above.
The 120 mm cannon is a new concept, designed in Israel, can withstand higher internal pressures, allowing to shoot projectiles with kinetic energy KE (Kinetic Energy) at a greater speed, while the semi-automatic loader has been equipped with enough space to accommodate up to at 10 strokes.

The 7.62 mm coaxial machine gun was replaced with a 12.7 mm one.
The movement organs were also revised: a new 1500 hp engine is coupled to a new transmission and new "Caterpillar" suspension systems (the so-called "Mazkom" system, the track-springs-wheel system). The maximum speed of this version is around 60 km / h.
360º visibility is ensured by a video system consisting of four cameras installed in reinforced parts of the hull. The wagon also mounts a digital battle data collection and display system, similar to the US IVIS, designed by the Elbit System. The adoption of this new version of the Merkava led to the total radiation of the old Centurion of British production and the Magach from the departments of the reserve.



Use: airbrush or brush

Reusable: YES

¥ 1.000,00
€ 8,00
£ 7,00
$ 9,00

IMPORTANT!!!
The currency value of your currency is only indicative, the real price you pay for the product will be determined upon your purchase by your banker



New Product "Stencil Markings Merkava Mk. IV and Mk. IV LIC

Orlee
Published by in New product ·
Tags: markingsmerkavamktank
       

Material: Stencil markings merkava mk. IV and mk. IV LIC 1:35

Number stencil: 1 pcs

Instructions:
Masking adhesive grey translucent,  matte surface, 0.080 mm thick

Info:
This stencil is produced by offering 22 stencils for merkava Mk. IV, Mk. IV version (LAHAV COMPANY - RHINO COMPANY) and mk4 LIC usable to replace the decals in the 1:35 accademy, Hobby Boss kit or other versions of kits for sale

History
The Merkava Mark IV is the latest version of the range of Merkava tanks built by Mantak (Merkava Tank Office). The Merkava Mark IV entered service with the Israeli Defense Forces in 2004 and is considered the most protected tank in the world.

the Merkava Mk. IV has the most distinctive feature of the new tower is the elimination of the servant's hatch. Its presence makes, according to Israeli military engineers, the tower more vulnerable to attack from above.
The servant can easily leave the wagon, in an emergency, from the rear hatch (as well as the entire crew). The Mk tank. IV was designed to provide 360º protection, including attacks from above.
The 120 mm cannon is a new concept, designed in Israel, can withstand higher internal pressures, allowing to shoot projectiles with kinetic energy KE (Kinetic Energy) at a greater speed, while the semi-automatic loader has been equipped with enough space to accommodate up to at 10 strokes.
The 7.62 mm coaxial machine gun was replaced with a 12.7 mm one.
The movement organs were also revised: a new 1500 hp engine is coupled to a new transmission and new "Caterpillar" suspension systems (the so-called "Mazkom" system, the track-springs-wheel system). The maximum speed of this version is around 60 km / h.
360º visibility is ensured by a video system consisting of four cameras installed in reinforced parts of the hull. The wagon also mounts a digital battle data collection and display system, similar to the US IVIS, designed by the Elbit System. The adoption of this new version of the Merkava led to the total radiation of the old Centurion of British production and the Magach from the departments of the reserve.



Use: airbrush or brush

Reusable: YES

¥ 1.000,00
€ 8,00
£ 7,00
$ 9,00

IMPORTANT!!!
The currency value of your currency is only indicative, the real price you pay for the product will be determined upon your purchase by your banker



New Update

Orlee
Published by in Update ·


new update
to the stencil Merkava mk2 - mk 2B to Mk 2D a special plastic masking is integrated, the price is now 17 CHF (15 €)

for all info see PAGE



New products "stencil Merkava Character markings Mk1 and Mk2"

Orlee
Published by in New product ·
Tags: charactermarkingsmarkingsmk1markingsmk2
     

Material: Stencil charater markings mk1 and mk2

Number stencil: 1 pcs

Instructions:
Masking adhesive grey translucent,  matte surface, 0.080 mm thick

Info:
This stencil is produced by offering 29 stencils for merkava mk1 and mk2

History
The merkava mk1 was born about 1979 with the idea of making it suitable for rough terrain between Syria and Lebanon, it had a 750 hp engine, superior in mobility to the American M-60, this type of wagon was used in the operation "peace in Galilee" on that occasion the merkava mk1 proved to be better than the t-72 Russians even if the first versions had some problems

Ther Merkava mk2 Entered into service in 1983 and equipped with an engine with a power of 900 hp, has an improved system of shooting control much more precise, which was also added a sensor FLIR .. Starting from this version the mortar 60 mm it was placed in an internal position, and the series of chains mounted on the back of the turret basket appears. The engine was also equipped with a strengthened transmission, allowing the wagon to move easily even on difficult terrain.


Use: airbrush or brush

Reusable: YES

¥ 1.000,00
€ 8,00
£ 7,00
$ 9,00

IMPORTANT!!!
The currency value of your currency is only indicative, the real price you pay for the product will be determined upon your purchase by your banker



New products "Stencil Israeli tank markings M113 / Zelda + 1 masking wheels by apa

Orlee
Published by in New product ·
Tags: israelitankmaskingM113
    

Material: Stencil israel tank markings m113 / Zelda + 1 markings wheels by APA

Number stencil: 2 pcs

Instructions:
Masking adhesive grey translucent,  matte surface, 0.080 mm thick
Masking adhesive green translucent,  matte surface, 0.080 mm thick, material by APA s.p.a

Info:
This stencil is produced by offering 23 stencils + 1 masking for m113 / zelda tank model wheels (various versions).

The versions that can be obtained through this stencil are: IDF zelda 1997, zelda d9 Doohi, IDF zelda Chata, IDF zelda lebanon 1977. This stencil sheet will make you appreciate your construction and will offer you a unique model of M113.

History
Its official IDF name is "Bardelas", but the soldiers call it M-113 or "Zelda" (which takes its name from the addition of an armor) or simply "The APC". They first arrived in Israel in 1972, although most of the APCs of this type were bought through American aid in the Yom Kippur war. The M-113 was intended to replace the old-fashioned armored vehicles that the IDF was using at the time, which were partially exposed, and were an easy target for enemy fire.

The M-113 has many advantages. These include: excellent maneuvering capabilities on difficult terrain, compatibility for air transport and amphibious capabilities. The IDF M-113 has undergone various upgrades in order to improve its resistance to hazardous materials, and to protect it from anti-tank fire, IEDs and machine guns. The APC serves in almost all IDF combat units, in virtually all areas of action, along with other advanced APCs.

Over time, the M-113 is slowly abandoning the first lines, replaced by more advanced models and joins the reserved units. The M-113 took part in the Yom Kippur War, in Operation Peace for Galilee, in the countryside in Lebanon and in the regions of Judea, Samaria and Gaza. In addition to the M-113, the IDF has several other tank-based APCs; Heavy APC.

Use: airbrush or brush

Reusable: YES

¥ 1.600,00
€ 12,00
£ 11,00
$ 15,00

IMPORTANT!!!
The currency value of your currency is only indicative, the real price you pay for the product will be determined upon your purchase by your banker.



New page "works

Orlee
Published by in Introduction ·
Tags: worktestproduct
[image:image-0]

We have introduced a new page within our site "works" it gives the opportunity to our customers to be able to advertise within the site, if you have made dioramas or scale models through our products, contact us we will be happy to publish your work on the site, we kindly ask you to send us photos and a small review of the work. We show you some works performed by our friends:

• Gunnar Baumer
• Michele Landriscina
• Fred Foot
• HuanJhong
• Matteo Nespoli



Stencil Character markings Merkava 3D and 3D Baz scale 1:35

Orlee
Published by in New product ·
     


Material: Stencil merkava 3D e 3D Baz Character markings tanks sign

Number stencil: 1 pcs

Instructions:
Masking adhesive grey translucent,  matte surface, 0.080 mm thick
this product stencil has 29 mini stencil (coats of arms and more) in  1:35 scale for israeli main battle tank merkava 3D e 3D baz model kit, numerous IDF unversal tactical markings. this stencil sheet will make you enjoy  your building and offer you a unique merkava model, what more you an use it to create merkava fleet with diffrent markings

Story
Merkava Mk. III has a new 120 mm smooth barrel gun manufactured under a Rheinmetall license, compatible with the standard NATO ammunition used by this weapon system. In addition, this version features a new 1200 hp engine and new suspensions and transmissions. The transmission allows to bring to the driving wheels about 1000 of the 1200 hp available






Use: airbrush or brush

Reusable: YES

¥ 1.000,00
€ 8,00
£ 7,00
$ 9,00

IMPORTANT!!!
The currency value of your currency is only indicative, the real price you pay for the product will be determined upon your purchase by your banker.



Tactical Markings Merkava 3D e 3D baz in scale 1:35

Orlee
Published by in New product ·
       

Material: Stencil merkava 3D & 3D baz tactical markings tank sign

Number stencil: 1 pcs

Instructions:
Masking adhesive grey translucent,  matte surface, 0.080 mm thick
this product stencil has 21 mini stencil (coats of arms and more) in  1:35 scale for israeli main battle tank merkava 3D e 3D baz model kit, numerous IDF unversal tactical markings. this stencil sheet will make you enjoy  your building and offer you a unique merkava model, what more you an use it to create merkava fleet with diffrent markings

Story
Merkava Mk. III has a new 120 mm smooth barrel gun manufactured under a Rheinmetall license, compatible with the standard NATO ammunition used by this weapon system. In addition, this version features a new 1200 hp engine and new suspensions and transmissions. The transmission allows to bring to the driving wheels about 1000 of the 1200 hp available


Use: airbrush or brush

Reusable: YES

¥ 1.000,00
€ 8,00
£ 7,00
$ 9,00

IMPORTANT!!!
The currency value of your currency is only indicative, the real price you pay for the product will be determined upon your purchase by your banker.



NEWSLETTER
Subscribe to the newsletter to stay updated on our news and offers!
Store Information

Orlee
6600 Locarno
Switzerland

call us now: +41 076 582 84 70




* All published prices are without VAT, more shipping cost. © 2018 ORLEE
We give you 30 days to return your purchases if you are not satisfied

* All published prices are without VAT, more shipping cost. © 2018 ORLEE
* All published prices are without VAT, more shipping cost. © 2018 ORLEE
Privacy Policy
Privacy Policy
Privacy Policy
SiteLock
Back to content | Back to main menu